978-808-5883 | 978-618-6114

Follow us

Choosing Between Dustless Blasting and Power Washing

Choosing Between Dustless Blasting and Power Washing

Dustless Blasting vs Power Washing: Which Is Best for Your Needs?

Cleaning can be quite a chore, especially if you’re dealing with very dirty surfaces. And when soap, water and some scrubbing doesn’t do the job anymore, you’ll need to use a more powerful method to get rid of the stubborn dirt. Fortunately, there’s power washing and dustless blasting.

But which one is the best choice for you? Let’s compare.

Dustless blasting

Dustless mobile blasting is the process that’s used primarily for stripping surfaces of paint, dirt, dust, and debris while also containing them, so they don’t get into the air and cause health risks to workers and other people around the area. Since dustless blasting mixes the abrasive with water, it’s easier to clean up after stripping, which is why this process is often used for cleaning or stripping cars, boats, concrete and masonry.

Power washing

Power washing has been used for many years as a form of cleaning different surfaces. It’s preferred by a lot of people because it doesn’t require any chemical cleaning agents, so it’s an “eco-friendly” option that doesn’t cause any contaminants to go airborne and cause serious health problems to people. Power washing can be used for removing paint, dust, cobwebs and other contaminants, although it’s not always efficient in cleaning some surfaces, which is why some experts use it in combination with dustless mobile blasting.

Dustless Blasting vs. Power Washing: Which is better?

While power washing is still being used in the market today because it’s efficient, dustless blasting has changed the game by being a safer, cleaner, and more effective way to prepare different types of surfaces. When you hire a commercial tile cleaning service, for instance, workers will use dustless blasting to get rid of any stubborn dirt, dust and paint without putting too much heat and friction on the surface that could cause the metal or aluminum to bend or warp.

There’s also a huge difference on the amount of water pressure that a dustless blaster uses against a power washer. In most cases, a power washer can use about 2,000 to 3,000 PSI of water, which means that it can also consume a lot of energy. A dustless blaster, on the other hand, will only consume 30 to 150 PSI, making it more energy- and cost-efficient. The same equipment also needs only about 20 gallons of water per hour since the abrasive does most of the work and workers don’t need a constant water source to get the job done.